p.
47/61
Figure 5.11.
Cross-section of the burner, showing the position of the grate at the
attachment process
;
NOTE :
The burner’s grate positioning is made in two steps:
1.
position the burner’s grate, so that its legs touch the bottom of the
burner’s combustion chamber;
2.
slide the grate until it fits below the inclined grate of the burner and
there is no gap between the grate and the inclined detail of the
burner;
Combustion chamber of the
main module of the burner
Legs of the burner’s grate
Inclined grate of the
burner’s main module
1. Initial positioning of
the burner’s grate
2. Final positioning of the
burner’s grate
