Zlin Aviation
Section 0
Maintenance Manual Introduction
Issued: 01/02/2006
QAP-AMM-Rev02
Date of latest Revision: 23/01/2013
Page Number: vii
SECTION 4 – OVERHAUL ...................................................................................................................... 4-1
4.1 Authorization to perform overhaul ........................................................................................... 4-2
SECTION 5 – MAJOR REPAIRS AND ALTERATIONS ................................................................................. 5-1
5.1 Authorization to perform major repairs and alterations ............................................................ 5-2
SECTION 6 – TASK-SPECIFIC TRAINING ................................................................................................. 6-1
SECTION 7 – SAFETY DIRECTIVES .......................................................................................................... 7-1
7.1 Continued Airworthiness Instructions ...................................................................................... 7-2
0.2 SCOPE
This manual has been written by Zlin Aviation sro in accordance with the standards of ASTM
F2483.
This document defines the content and structure of the maintenance manual for Savage LSA
Aircrafts models Classic, CUB, Cruiser, manufactured by Zlin Aviation sro, and its components
while operated as Light Sport Aircraft. It also establishes guidelines for the qualifications to
accomplish the specified maintenance tasks on U.S. certificated Savage LSA Aircrafts.
For the SAVAGE airplanes that are not under LSA rules and when the figure of a LSRMA is not
issued, all the maintenance procedures designated to a LSRMA have to be made by a Zlin Aviation
s.r.o. authorized technician if it is not against the national rules of the State of registration of the
airplane.
NOTE:
Zlin Aviation sro, cannot through this manual address all of the safety concerns associated
with the use of this document. It is the responsibility of the user of this document to establish
appropriate safety and health practices and to determine the applicability of any regulatory
limitations prior to use.
