Zlin Aviation
Section 1
Maintenance Manual Aircraft Maintenance Manual
Issued: 01/02/2006
QAP-AMM-Rev02
Date of latest Revision: 23/01/2013
Page Number: 1-12
1.1.7 TIRE INFLATION PRESSURES
Main Standard Tire
Tundra Tire 8.00 6”
Max 16psi
Min 13psi
1.10bar
0.9bar
Matco Tailwheel
32psi
2.2bar
Alaskan Bushwheels
6/12 psi (See manual provided ABI-TIRE-ICA)
1.1.8 APPROVED OILS AND CAPACITIES
See Rotax 912 ULS Operators Manual section 2.5
Oil:
Motorcycle oil of a registered brand gear additives. If using aircraft oil, than only
blended one.
Caution
: at the selection of suitable lubricants refer to the additional information in the service
information SI-912-016, latest edition.
Link:
http://www.flyrotax.com/portaldata/5/dokus/d05289.pdf
Oil specification
Use only oil with API classification “SG” or higher!
Due to the high stresses in the reduction gears, oils with gear additives such as high
performance motor cycle oils are required.
Because of the incorporated friction clutch, oils with friction modifier additives are suitable as
this could result in a slipping clutch during normal operation.
Heavy duty 4-stroke motor cycle oils meet al the requirements. These oils are normally no
mineral oil but semi- or fully synthetic oils.
Oils for Diesel engine are due to
insufficient high temperature properties and additives
which favour clutch slipping, generally unsuitable.
Caution:
if the engine is mainly run on AVGAS more frequent oil changes will be required.
See service Information SI-912-016, latest edition.
Engine Coolant: refer to Rotax 912 ULS Operators Manual section 2.3
