Zlin Aviation
Section 1
Maintenance Manual Aircraft Maintenance Manual
Issued: 01/02/2006
QAP-AMM-Rev02
Date of latest Revision: 23/01/2013
Page Number: 1-27
Propeller
See propeller maintenance manual. In addition make these control:
Level
of
certification
1
Check propeller bolts. Verify attachment bolts are in good condition
and correctly torqued.
LSRMA
2
Check propeller blades and metal leading edge for condition,
indentation, stone chips. Any major damage noted will prevent any
further flight until damage is rectified and/or propeller replaced.
LSRMA
3
Check for the perfect distance of each blade from a fix point, like the
end terminal of the muffler. Switch off the magnetos. Turn the prop and
verify both the blades distance from the same point.
LSRMA
4
Check spinner condition and installation
LSRMA
5
With magnetos off, control for excessive play into the gear box,
moving just a little the propeller.
LSRMA
Wings, Control Surfaces, Fuselage, external Cabin
Level
of
certification
1
Check windscreens and all windows for cleanliness and damage.
Ensure door hinges are in good condition. Lube hinges.
Owner
2
Check door looking system for security
Owner
3
Inspect the dacron covering fabric for damages or crack on the
external paint.
Owner
4
Clean the external bottom of the fuselage from oil or dust.
Owner
5
Inspect for condition the engine cowling and spinner.
Owner
6
Visual inspection of the top of the wing. Clean and check for damages. Owner
7
Check the aluminium plate riveted and glued over the leading edge,
for any bending along all his length.
Owner
8
Check access panel security.
Owner
9
Check bolts and nuts security and correct torque on wing support
struts.
LSRMA
10
Check bolts and attachments, wing leading and trailing edges to
fuselage.
LSRMA
11
Check the struts for bending, damages. Bolts and nuts for correct
torque. Check the jury struts for any damage, dust. Check bolts/ nuts
LSMRA
12
Inspect the correct fixation of the strobes if installed. Check the
electrical connections, opening the round inspection door near the
strobes
Owner
13
Ensure ailerons and flap hinge pins and rod connections are correctly
fastened and locked.
LSRMA
14
Check for security bolts and nuts of the universal joint, connecting the
fuselage to the rear leading edge.
LSRMA
15
Control that adhesive gap seals over the flaps are still effective and
glued
Owner
16
Verify the tail surface supporting struts and attachment pins to
fuselage are secured and in good condition. Verify cables conditions.
LSRMA
17
Check vertical stabilizer (fin) attachment pins to fuselage, stabilizer-
elevators pins and locking pins for security. Check rudder control
LSRMA
