background image

Zlin Aviation 

 

Section 7  

Maintenance Manual           

 

Safety directives

 

Issued: 01/02/2006 

       

 

     QAP-AMM-Rev02 

Date of latest Revision: 23/01/2013                                            

 Page Number: 7-2 

 

 
7.1    CONTINUED AIRWORTHINESS INSTRUCTIONS 
 

The following is an extract from ZA document QAP-CA-OSMM (Operational Safety Monitoring 
Manual). 

 

Availability of Safety Information 

The owner is responsible for reading and complying with all notices issued by Zlin Aviation 
regarding safety of flight and continued airworthiness, and for complying with all applicable aviation 
authority regulations in regard to maintaining the airworthiness of the 

Light Sport Aircraft Savage 

owned by him. 
The latest safety of flight information regarding the 

Light Sport Aircraft Savage 

may always be 

obtained at 

www.zlinaero.com

in the Owner Area > Download Area. 

URL: 

http://www.zlinaero.com/eng/ownerarea.php 

 

Alternatively, owners can also find the appropriate latest information in the website 

http://icub.aero/

, page “For owners”, but official and most updated information is to be considered 

the one of the manufacturer’s website. 
 

Instructions for maintenance and continued airworthiness 

The Standard reference document for the maintenance of any Savage Aircraft is the Maintenance 
Manual (QAP-MAM), delivered with any Savage Aircraft. Owner is required to respect all described 
scheduled intervals to keep his aircraft airworthy. Any changes to the Maintenance Manual, will be 
notified to the owners via the already described means of communications, and latest versions of 
the Manuals will be made available for download in the Owner Area of the website. 
 
When and if corrective action is determined by 

Zlin Aviation 

to be warranted, 

Zlin Aviation 

will 

issue a notice to the owner/operator containing: 
 
1) A title which indicates its required priority to the owner: 
a) 

“SAFETY ALERT” 

for notifications that require immediate action. 

b) “

SERVICE BULLETIN” 

for notifications that do not require immediate action but do 

recommend future action. 
c) 

“NOTIFICATION” 

for notifications that do not necessarily recommend future action 

but are primarily for promulgation of continued airworthiness information. 
 
2) Date of emission, effect, and time and other general limitations for completion of any 
required corrective action. 
 
3) The make, model and serial number of the Savage Aircraft to which the notice refers. 
 
4) A number that uniquely identifies the notice. 
 
5) Number of page and total pages 
 
The owner is responsible for ensuring that any needed corrective action is completed as specified 
in a notice, or by the next scheduled annual inspection. The owner shall also inform Zlin Aviation 
upon completion of any prescribed corrective action following a notice, using either the specific 
Form in the Owners Area of the website (Service Report Form, select option Attestation of 
Corrective Action Taken), or by filling and sending via e-mail (to: 

[email protected]

or 

mail the form entitled Attestation of Corrective Action Taken provided in the next pages. 
Should an owner/operator not comply with any mandatory service requirement, the Light Sport 
Aircraft Savage owned by him shall be considered not in compliance with applicable ASTM 

Содержание Savage Classic



































































































Отзывы: