NVR User Manual
57
Direction Control
: Control the pan/tilt directions (top, bottom, left, and right) of the PTZ. You can
control a direction by clicking the corresponding arrow and hold. When you release the mouse, the
direction is not under control.
Speed
: Control the speed when the PTZ moves up, down, left, and right or in tour mode.
Zoom
: Control the zooming of the PTZ camera lens.
Focus
: Control the focus of the PTZ camera lens.
Iris
: Control the aperture of the PTZ camera lens.
Preset: Type a value for
Preset
. The preset point of the PTZ cameras is invoked.
Auto Tour
: Type a value for
Auto Tour
. Tours are enabled for PTZ cameras.
AutoPan
: Enable PTZ cameras to rotate horizontally.
AutoScan
: It is used to enable linear scanning for PTZ cameras.
Pattern
: Control the auto pan/tilt of the PTZ.
PTZ Config
: It allows you to set
AutoScan
,
Pattern
,
Preset
, and
Tour
.
Aux. On
: It is used to start auxiliary devices.
Aux. Off
: It is used to shut down auxiliary devices.
6.8
Screen Settings and Others
Icon
Description
It is used to adjust the brightness of the screen.
It is used to adjust the contrast of the screen.
It is used to adjust the saturation of the screen.
