3 System Menus
22
Flip
: Enable PTZ cameras to flip.
Reset
: Reset the PTZ to the poweron state.
Direct Aux Oper
: Start or shut down auxiliary devices. If a camera is connected to external lights, click
On
to turn on the lights or click
Off
to turn off the lights.
Aux Num Oper
: If the PTZ is connected to multiple auxiliary devices, click
On
to start the auxiliary
devices or click
Off
to shut down the auxiliary devices.
Preset
: Set the No. of a preset point.
Name
: Set the name of a preset point.
Set
: Set the current position to a preset point by clicking this button.
Del Preset
: Delete the current preset point by clicking this button.
Click a PTZ camera channel where you want to create a preset point. Control the horizontal and
vertical positions of the PTZ camera. Type the No. and name of the preset point. Click
Set
. The preset
point is created successfully. You can click
Del Preset
to delete the preset point.
Pattern
: Set the number of the tour track.
Start
: Set the start point of the tour track.
End
: After you click
Start
, the PTZ starts pan/tilt. Return to the setting screen, click
End
and set the
end point of the tour track.
Click a PTZ camera channel where you want to set the tour track. Control the horizontal and vertical
positions of the PTZ camera. Type the No. of the tour track. Click
Start
and set the start point of the
tour track. Make the PTZ move along the expected tour route. Click
End
. The tour track is set
