6 Web Server Client
54
6.2
Login
Type the IP address (default IP address:
192.168.1.88
) of the NVR in the address box of the Internet
Explorer, for example,
http://192.168.1.88
. Access the login page.
When you log in by using the Internet Explorer for the first time, the system prompts you to load and
install plugins. The user name and password must be consistent with those used to log in to the
software on the device. The default administrator user name for the administrator of the NVR is
admin
,
and the default password is
123456
. You need to change the password in time.
?
Notes:
(1)
Check that the NVR is properly connected to the network based on the preceding descriptions of
device connections and operations.
(2)
Set the IP address, subnet mask, and gateway for the host and NVR. If no routing device is
available on the network, assign an IP address on the same network segment. If a routing device is
available on the network, set the gateway and subnet mask as required. To view the network settings
of the NVR, choose
Setting
>
Network
.
(3)
Check whether the network is connected properly by using the
ping ***.***.***.***
(IP address of the
NVR) command. If the returned TLL value is 64, the network connection is normal.
(4)
Web controls are automatically identified and downloaded. After the update of a control, the
previous control is deleted.
6.3
Web Server Client Screen
After you load in to the client, the main screen is displayed, as shown in the following figure.
