NVR User Manual
21
2. Start recording in all channels.
To enable automatic recording in all channels, select
Always
( ) for
All
. After automatic recording
is enabled in all channels, the NVR starts recording based on the
Timer
,
Motion
, and
Alarm
settings on the
Record Setting
screen and provides automatic recording channels.
To enable scheduled recording in all channels, select
Config
( ) for
All
. After scheduled recording
is enabled in all channels, the recording stops in all channels despite the scheduled settings on
the
Record Setting
screen.
3. Stop recording in all channels.
To stop recording in all channels, select
Close
( ) for
All
. Recording then stops despite the status
of the channels.
3.2.2
PTZ Control
Direction Control
: Control the pan/tilt direction of the PTZ as instructed by the arrows (top, top right,
top left, left, right, bottom right, bottom left, and bottom). You can control a direction by clicking the
corresponding arrow and hold. When you release the mouse, the direction is not under control.
Speed
: Control the speed when the PTZ moves up, down, left, and right or in tour mode. It ranges
from 1 to 8. The larger the value, the higher the pan/tilt speed.
Zoom
: When the camera lens provides the electric focusing function, click
–
to move the focus forward
to obtain a clearer image and click
+
to move the focus backward to make the image blurry.
Focus
: When the camera lens provides the electric zooming function, click
–
to zoom in to monitor
remote scenes or click
+
to zoom out to monitor nearby scenes.
Iris
: When the camera lens provides the electric iris function, click
–
to reduce the aperture or click
+
to
enlarge the aperture.
Next Page
: Click this button to go to the next page on the PTZ.
Set
: Click this button to go to the PTZ Set screen. You can set
Preset
,
AutoScan
,
Pattern
,
Border
,
and
Tour
.
Preset
: Type a value for
Preset
. The PTZ then turns to the preset position.
Pattern
: Type a value for
Pattern
. The tour track of PTZ cameras is invoked.
Tour
: Type a value for
Tour
. The tour route of PTZ cameras is invoked.
AutoScan
: Enable linear scanning for PTZ cameras.
AutoPan
: Enable PTZ cameras to rotate horizontally.
