SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
25
ZI-STE1800IV
15
SAFETY
This section contains information and important notes on safe start-up and handling of the
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and
prevent misunderstandings as well as personal injury and damage to property. In
addition, observe the symbols and pictograms used on the machine as well as the
safety and hazard information!
Intended use of the machine
The machine is intended exclusively for the following activities:
For operating electric devices whose max. performance is within the specifications for the
machine. A higher starting current of inductive loads must be considered. The machine is
designed to operate from conventional resistive and inductive loads, such as Lights, electric
hand tools (drills, electric chain saws, compressors) determined.
When connecting to stationary systems such as heating, power supply for a house, air
conditioning or for the power supply of mobile homes it is mandatory to consult a qualified
electrician and the manufacturer of the heating system regarding the connection and earthing.
ZIPPER-MASCHINEN
assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
15.1.1
Technical Restrictions
The machine is intended for use under the following ambient conditions:
Relative humidity:
max. 65 %
Temperature (for operation)
+5° C bis +40° C
Temperature (for storage and/or transport)
-20° C bis +55° C
15.1.2
Prohibited Use / Forseeable Misuse
Operation of the machine without adequate physical and mental aptitude
Operating the machine without appropriate knowledge of the operating instructions
Changes in the design of the machine
Operating the machine in wet and rainy conditions
Operating the machine in a potentially explosive environment
Operating the machine indoors or in closed areas
Operation of the machine without functioning or missing guards
Remove the safety markings attached to the machine
Modify, circumvent or disable the safety devices of the machine
The improper use or disregard of the versions and instructions described in this manual will
result in the voiding of all warranty and compensation claims against Zipper Maschinen GmbH.
User Requirements
The machine is designed for operation by one person. The physical and mental aptitude as well
as knowledge and understanding of the operating instructions are prerequisites for operating the
machine. Persons who, because of their physical, sensory or mental abilities or their
inexperience or ignorance, are unable to operate the machinery safely must not use it without
supervision or instruction from a responsible person.
Basic knowledge of metalworking especially the correlation of material, tool, feed and speeds.
Please note that local laws and regulations may determine the minimum age of the
operator and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the instruction and supervision of a qualified electrician.
