CLEANING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
34
ZI-STE1800IV
19
CLEANING
We recommend cleaning the machine immediately after each use.
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as
possible
Wipe the equipment with a moist cloth and some soft soap or blow it with compressed air
at low pressure.
NOTICE:
The use of solvents, aggressive chemicals or scouring agents can cause
damage to the plastic parts of the machine!
Thus, when cleaning, use only water and, if necessary, mild detergents.
20
MAINTENANCE
W A R N I N G
Hot surfaces and rotating machine parts while the engine is running can cause
serious injury or even death. Always stop the machine before carrying out any
conversion, adjustment, cleaning or maintenance work and secure it against
unintentional restarting.
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
N O T I C E
Only a properly maintained equipment may be a satisfactory tool. Care and
maintenance deficiencies can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centres.
Improper operation may damage the equipment or endanger your safety.
Maintenance plan
(1) Interval can vary according to
the air quality
(2) Only by specialists!
Prior to
each
start
(for new
machine)
after first
Month or
20
operation
hours
Every 3
months or
every 50
operation
hours
Every 6
months
or every
100
operatio
n hours
Every 2
years or
every 300
operation
hours
Engine oil
Controll of
the level
X
Change
X
X
Air filter
Control
X
Change
X (1)
Spark plug
Control
X
Change
X
Carburettor
Control
X
Fuel tank and fuel
tank filter
Control
X
Clean
Yearly (2)
Fittings /
Fastenings
Control
Change
Yearly (2)
Fuel pipe
Control
X
Every 2 years (2)
20.1.1
Engine oil exchange
N O T I C E
Waste oils are toxic and must not be released into the
environment!
Contact your local authorities for information on proper disposal.