ZIPPER MASCHINEN ZI-STE1800IV, Руководство пользователя

Страница: 39 / 52

DISPOSAL
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  39
ZI-STE1800IV
22 DISPOSAL
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options
available.
If you buy a new machine or an equivalent device from your specialist
dealer, he is obliged in certain countries to dispose of your old machine
properly.
23 TROUBLESHOOTING
W A R N I N G
Hot surfaces and rotating machine parts while the engine is running can cause serious
injury or even death. Always stop the machine before carrying out troubleshooting work
and secure it against unintentional restarting.
Fehler Mögliche Ursache Behebung
The engine doesn’t start  Incorrect startup sequence  Observe the correct start procedure
 Insufficient pulling speed of
recoil starter handle  Pull recoil starter handle stronger
 Gasket damaged  Replace gasket
 Air filter dirty  Clean/exchange air filter
 Lack of fuel supply  Checking the fuel tank for foreign
objects
 Refuel
 Fuel line fault  Check fuel line for kinks or damage
 Engine flooded  Unscrew spark plug, clean and dry;
then pull the recoil starter handle
several times; screw spark plug back
in again
 Spark plug loose  Screw in spark plug
 Spark plug damaged  Exchange spark plug
 Spark plug cap not plugged in  Plug in spark plug cap
 No ignition spark  Clean / exchange spark plug
 Check ignition cable
 Incorrect fuel  Check fuel type, use unleaded fuel,
do not use ethanol.
 Fuel tap closed  Open Fuel tap
 Damaged magneto  Contact customer service
 Not enough engine oil  Check engine oil level
Engine starts and stops
immediately  Incorrect carburetor setting
(idle speed)  Contact customer service
Machine works with
interruptions (stutters)  Carburetor is incorrectly
adjusted  Contact customer service
 Spark plug is sooted  Clean / exchange spark plug
 Check spark plug cap
Oil level indicator light
lights up  Not enough/ no oil  Fill in engine oil
Run light does not light up  engine problem  Contact customer service
Overload indicator light
lights up  Overload protection activated  Too high power consumption
 Short circuit protection
activated  Check connected devices
 Defective connection or
defective cable connection  Check and repair
 Defective socket  Contact customer service