S U P E R S P O R T
10
Note that the engine rails fit fully in their slots. No
part of the engine rails should be above the
bulkheads.
This kind of looks like a boat, doesn’t it?
Take a break, and give the glue a little while to
completely cure.
Spines
The first step is to test fit and glue the spines in
place. We used Titebond lll.
Thr tapered end goes forward.
Both spines should be flush with the bulkhead tops.
Use clamps or tape to hold them in place.
Allow to cure.
These help support the deck.
