P R O V E E
3
The manufacturer assumes no liability for damages or other loss in
the use of this product, as we have no control over the construction
or end use of this product.
Purpose
This boat was designed as race boat from the start. It is legal for racing in any
mono class, due to its vee bottom, if you choose to race.
The Pro Vee was designed for big power and big water. It will handle as much
power as you can get, and go through water that would upset most other “race”
hulls.
You can build this boat without having the engine or radio, but it does make it
easier to have them available when you build.
You can use any gasoline engine (check the rules), as long as it has mounts
for 5 inch rails.
Please note that this boat is a very high performance product. This is the
current state of the art in Mono hull design as of 2015/2016.
The Pro Vee requires that you build it squarely and set it up perfectly.
If you do so, you will have one of the fastest, most competitive hulls available.
Don’t eyeball anything. Measure EVERYTHING to be sure you are 100%
correct.
Use a straightedge and a square to build and setup a perfect boat. Nothing
else will do.
That said, this is one of the easiest building gas boat kits you can buy. Really!
You can do it!
