Zip ZIP116, Инструкция по эксплуатации

Страница: 50 / 413

20/04/2023
44
Zip DVR Manual V2
ZipNVR.com
Preset Controls Explained
The buttons in the left hand panel are used to position the camera when saving
preset locations, creating presets, calling presets, removing presets and
starting/stopping cruises. The options available and functions may vary depending on
the capabilities of the PTZ itself.
Icon/Control Name Function
Directions
The direction buttons are used to control the left/right
and up/down movement of the PTZ camera when
creating a preset position.
Auto
Cruise
Clicking the centre button will start the the PTZ rotating
continuously until stopped. To stop the rotation either
click the centre button again or click on of the direction
buttons.
Preset
Number
This is where you can enter a preset number you want
to call or the number you want to assign to a new
preset for the current camera position.
Dwell
Time
When creating a new preset position the Dwell Time
determines how long the PTZ will stay in that position
during a cruise.
Set Preset
When you have positioned the camera, assigned a
Preset Number and set the Dwell Time you can click
the Set Preset button. This will create a preset in the
Preset List for this configuration.
Clear
Preset
After setting a preset the number in the Preset Number
field will increase by 1. Clicking the Clear Preset button
once will reduce the Preset Number to the last used.
Each further click of the Clear Preset button will delete
the last preset from the Preset List.
Go To
Clicking the Go To button will action the preset number
currently showing in the Preset Number field. This can
be a pre-defined preset specific to the camera or a
preset from the Preset List.
Start
Cruise
/
Stop
Cruise
The Start Cruise button will start to cycle through the
saved preset positions in the Preset List. The PTZ will
stay in each position for the defined Dwell Time then
move on to the next position. The cruise will repeat until
you click Stop Cruise.
Save
Click Save to save the current Preset List. Any new
presets you create will be lost when you exit the PTZ
Controls screen if you haven't clicked Save.