Zip ZIP116, Инструкция по эксплуатации

Страница: 348 / 413

20/04/2023
342
Zip DVR Manual V2
ZipNVR.com
To configure NTP follow these steps:
1. Tick the Enable NTP check box.
2. Select the time server you want to use from the Server Address drop down list.
There a 3 public time servers you can choose, time.windows.com ,
time.nist.gov or pool.ntp.com . Alternatively if you have access to a private time
server you can select User-Defined and enter the server's IP address.
3. Once you have selected you time server click the Update Now button to set you
recorder to the correct date and time.
Setting Up Daylight Saving Time
You can enable Daylight Saving Time (DST) so that the recorder keeps the right time
when the clocks go forward or back. To do this follow these simple steps:
1. Tick the Enable DST check box to turn on Daylight Saving Time. The default
settings are already configured for the UK so this is all you need to do. If you are
using the recorder outside the UK proceed to step 2.
2. You can set the amount of time the clock moves forwards and back from the Time
Offset drop down list.
3. DST can be set to occur on a specific Date or Week . You can choose the relevant
option in the DST Mode drop down list.
4. You can set when the clocks move forward by setting the Start Time . The options
available will differ depending on DST Mode as shown below:
Week - set the month, the week in the month, the day of the week and the time of
day the clocks go forward.
Date - select the date and the time of day the clocks go forward.
5. Finally set when the clocks move back by setting the End Time . The options
available will differ depending on DST Mode as shown below:
Week - set the month, the week in the month, the day of the week and the time of
day the clocks go back.
Date - select the date and the time of day the clocks go back.
Defaulting Settings
To restore settings back to the factory default you can click the Default button.
Saving Changes
When you are happy with the current settings click the Apply button. If you exit the
window without saving any changes will be lost.