Zip ZIP116, Инструкция по эксплуатации

Страница: 247 / 413

© 2023 System Q Ltd
241
Index
ZipNVR.com
Trigger An Alarm Output
You can tell the recorder to trigger alarm outputs to activate a 3rd party device such
as a floodlight when there is an alarm input. Clicking the
Cog icon in the Alarm Out
column will open the Alarm Output window where you can set which alarm outputs will
be triggered. These can be the recorder's own local alarm outputs, the alarm outputs
of connected IP cameras or you can simply select All.
Latch Time
The Latch Time is the amount of time the alarm output remains active. You can set
the Latch Time up to a maximum of 60 seconds using the drop down list
Record Video On Alarm Input
The recorder can be set to capture footage from a single or multiple channels when
there is an alarm input.
To set which channels are recorded click the Cog icon in the Record column to
display the Record Channel window.
You can enable or disable channel recording by ticking or unticking the Record
Channel check box.
When Record Channel is enabled you can choose all analogue or all IP cameras by
selecting the
Analogue Channels and IP Camera check boxes. Finally you can
select any combination of analogue and IP cameras by highlighting the individual
channels.