Zip ZIP116, Инструкция по эксплуатации

Страница: 297 / 413

© 2023 System Q Ltd
291
Index
ZipNVR.com
Latch Time
The Latch Time is the amount of time the alarm output remains active. You can set
the Latch Time up to a maximum of 60 seconds using the drop down list
Record Video On Detection
The recorder can be set to capture footage from a single or multiple channels.
Typically there is detection on camera 1 you would want to record channel 1. This
feature however allows you trigger recording on nearby cameras at the same time or
all entrances for example.
To set which channels are recorded click the Cog icon in the Record column to
display the Record Channel window.
You can enable or disable channel recording by ticking or unticking the Record
Channel check box.
You can then choose all analogue or all IP cameras by selecting the Analogue
Channels and IP Camera check boxes. Finally you can select any combination of
analogue and IP cameras by highlighting the individual channels.
Post Recording
The Post Recording time determines how long the recorder continues to capture
footage for after there is detection.
You can set the post recording time between 30 seconds and 5 minutes using the
Post Recording drop down list.
On Screen Notification
When Show Message is turned on an icon of a alarm-bell will appear in the top right
corner of the screen whenever there is detection. You can turn this feature on or off
using the
Show Message check box.