Zip ZIP116, Инструкция по эксплуатации

Страница: 129 / 413

© 2023 System Q Ltd
123
Index
ZipNVR.com
Pairing Cameras
Paring the Zip wireless cameras is easy just follow these simple steps.
1. Connect the Zip Rapid Deploy USB wireless receiver to the recorder.
2. Switch up to 4 IP channels to USB Wireless as explained in the Channel Config
sub-menu. 1 wireless camera channel will be made available in the USB Wireless
sub-menu for each IP channel you have switched to USB Wireless.
3. To pair a Zip wireless camera to one of the wireless camera channels, press the
pairing button on the back of the camera and then press then pair icon (blue
camera) on the channel you want to assign the camera to.
4. A pairing timer will begin to countdown. Once the camera and receiver have found
each other and successfully paired the timer will disappear. The Pair State for the
selected wireless camera channel should now read Paired to show that the
wireless camera is successfully connected to the recorder.
Channel Name
To make identifying cameras easier you can assign a channel name to each
wireless camera, for example: Main Gate. to do this just click inside the grey Channel
Name field and
virtual keyboard will be displayed. Once you have entered the a
camera name click Apply to save your changes.
Pair State
The Pair State column shows if the allocated wireless channel has a camera paired
to it or not. If if a camera has been paired to the channel it will display "
Paired ".
Likewise if the channel doesn't have a camera paired to it, it will display " Not
Paired ".
Post Recording
The Post Recording time determines how long the channel records for after the last
detected movement. This ensures entire incidents are recorded as the recorder will
continuously capture footage as long as there is movement and will continue to
record for the set Post Recording time after the movement has ended.
You can select the Post Recording time from the drop-down list. You have 3 options
to choose from, 10 seconds, 20 seconds or 30 seconds.
Camera Version
The Camera Version column shows the camera's firmware version.
30