Zip ZIP116, Инструкция по эксплуатации

Страница: 232 / 413

20/04/2023
226
Zip DVR Manual V2
ZipNVR.com
via the Zip Vision PC client software or mobile app. When playing back footage you
can select the less demanding substream for smooth playback on slower internet
connections.
Mainstream will only record the high quality mainstream. If you don't intend on
playing footage back remotely then a recording of the lower quality substream is not
required. By recording the mainstream only you can save on disk space which would
usually be taken up by the substream.
Enabling Pre-recording
Some features on the recorder such as motion detection allow you to specify a pre-
record time. This is an amount of time the recorder will capture footage for before an
event trigger occurred. For example, if you set a motion detection pre-record time of
30 seconds and motion detection is triggered, the recorder will capture the motion
trigger plus the 30 seconds before the trigger so you can see the build up to the
event.
You can enable or disable pre-recording by ticking or unticking the PreRecord
check box.
Copying Record Settings From One Camera To Another
Rather than re-entering the same settings for each camera you can copy settings
from one camera to another by clicking the
Copy button. For more information on
copying settings see the Parameter Copy section.
Defaulting Settings
You can restore settings back to their default value by clicking the Default button.
Saving Changes
Once you are happy with your settings click the Apply button to save them.
Alternatively you can right click with the mouse to exit the Mainstream menu without
saving changes.
383