Zip ZIP116, Инструкция по эксплуатации

Страница: 145 / 413

© 2023 System Q Ltd
139
Index
ZipNVR.com
In the bottom half of the window you will see editable IP settings. It is important to
note that these are
not the camera's IP settings, these are the settings the recorder
uses to look for the camera. Therefore these settings have to match with the
camera's otherwise the recorder will not be able to connect to the camera. To make
things easier, when you select select a camera these fields are automatically
populated for you.
If the camera you want to add is not displayed in the list you can click the Search
button. The recorder will then search for devices on the network and refresh the list.
IP Address/Domain
This is the IP address the recorder will connect to. We recommend leaving this as it
is once you have selected your camera.
Camera Name
You can enter a name up to 8 characters long for your camera. This will be overlayed
onto the camera's image during live view and on recorded footage.
Port
This is the port in the router where the recorder will look for the camera. We
recommend leaving this as it is once you have selected your camera.
Protocol
The protocol should be detected and set automatically and in most cases you can
leave this as it is. For more information on configuring protocols see the
Protocol
Manage section.
Username & Password
You can manually enter the Username and Password if required so that they match
the camera. For Zip cameras you can leave them as they are unless you have
changed the default username and password in the camera itself.
The username and password fields will be populated automatically based on which
protocol is selected. You can change the username and password assigned to each
protocol in the
Default Password screen by clicking the Default Password
button.
Bind Channel
The Bind Channel drop-down list allows you to choose which channel the camera is
assigned to on the recorder.
154
138