Zip ZIP116, Инструкция по эксплуатации

Страница: 251 / 413

© 2023 System Q Ltd
245
Index
ZipNVR.com
You can enable or disable channel recording by ticking or unticking the Record
Channel check box.
You can then choose all analogue or all IP cameras by selecting the Analogue
Channels and IP Camera check boxes. Finally you can select any combination of
analogue and IP cameras by highlighting the individual channels.
Post Recording
The Post Recording time determines how long the recorder continues to capture
footage for after the last movement was detected. This gives you a bit of leeway in-
case the object which triggered the motion detection moves again or returns.
You can set the post recording time between 30 seconds and 5 minutes using the
Post Recording drop down list.
On Screen Notification
When Show Message is turned on an icon of a red bell with an S inside it will
appear in the top right corner of the screen whenever there is a Smart trigger. You
can turn this feature on or off using the
Show Message check box.
Email Notifications
You can set the recorder to include Smart triggers in its email reports by selecting the
Send Email check box. For more information on setting up emails accounts and
email schedules see the
Email section in the Network Menu.
FTP Uploads
You have the option to automatically upload snapshots of Smart triggers or video
footage covering the incident to an FTP server. You will first need to configure the
FTP server connection as described in the
FTP section. Once this is set up you
can simply select the FTP Picture Upload and/or the FTP Video Upload check
boxes.
Cloud Uploads
You can also automatically upload snapshots or video footage of Smart triggers to a
cloud storage account. This can be Dropbox or Google Drive. You will first need to
configure your cloud storage account as described in the
Cloud section. When
you have set up your cloud storage account you can select the Picture To Cloud
and/or the Video To Cloud check boxes.
309
314
329