Zip ZIP116, Инструкция по эксплуатации

Страница: 364 / 413

20/04/2023
358
Zip DVR Manual V2
ZipNVR.com
15.3 System Menu - RS485
You can configure the recorder's RS485 output signals in the RS485 menu.
Note - These settings need to match the settings of the RS485 device you are
wanting to control via the recorder. You can then send your RS485 commands from
the
Kontrol tab in the Zip Vision PC client software.
Baudrate
This is the address setting and the speed of communication. You can choose the
baudrate that matches your device from the drop down list.
Data Bit
The Data Bit is the amount of data sent in each data package. This can be set from 5
to 8 in the drop down list.
Stop Bit
The Stop Bit is sent after a data package so that the device knows that was the end
of the data package. This can be set as 1 or 2 from the drop down list.
Parity
The Parity is the error checking of transmitted data. This can be set to None, Odd,
Even, Mark or Space from the drop down list.
Flow Control
For the Flow Control you can select None, Software for XOn / XOff commands or
Hardware if handshaking is required.