INSTRUCTION MANUAL CENTRAL COMMAND STATION MX10 Page 37
11.
USB connection to the computer
This is a general description, valid for different applications, but NOT a certain programme.
For the PC to communicate with an MX10 via USB, they have to be interconnected by a cable type “
A
to mini B
”. The “USB client” socket on the MX10 is in the back, beneath the antenna. The necessary
driver
is usually automatically ins
talled and a new COM port can be read out in “Connections (COM &
LPT) in the device manager. This COM port has to be changed to Com port 10.
In case, the COM interface was not automatically installed, do it manually by following the described
procedure: C
onnect MX10 to USB and turn it on. On the computer the “
Control panel
” opens; an in it
the “
device manager
”:
In the device manager:
Open USB controller
Open “USB serial converter”
Open he tab “Extension”
and activate “load VPC”.
If this tab is not available,
select the second tab “Driver”,
select “Update driver”.
No the device manager shows “unknown ob-
ject” - update the driver also in this place. If all
those steps were carried out successfully, the
device manager sh
ows under “Connections”
(COM & LPT):
If COM port 10 is not yet used, select it.
