Zimmer SB Series, Инструкция по установке и эксплуатации

Страница: 7 / 23

7
5 Product description
The products are designed for holding, transporting and positioning workpieces.
SB series products enable a swivel angle of 90° or 180°, which are set using the end stops.
SBZ series products enable a swivel angle of 90° or 180° depending on the product variant.
5.1 Type plate
A type plate is attached to the housing of the product.
XXX
XX-XXXXXX
am
an
The article number and the confirmation number are shown on the type
plate.
am
Article number
an
Confirmation number
INFORMATION
Please state the confirmation number in the event of damage or a complaint.
►
Please contact Zimmer Customer Service if you have any questions.
INFORMATION
The products of the SB series are delivered in pairs.
The products of the SBZ series can be supplied as a powered swivel jaw with a swivel angle of 90° or 180° as well
as a counter bearing without a drive.
INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ
DDOC00246 / d
EN / 2022-11-09
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com