Zimmer SB Series, Инструкция по установке и эксплуатации

Страница: 16 / 23

16
11.2 Setting the swivel angle for the SBZ series
The swivel angle is preset by the factory-installed drive flange. The product is equipped with stop screws, which allow an
adjustment of the swivel angle of +/- 3° per end stop.
►
Switch off the power supply.
►
Loosen the lock nut of the stop screw on the desired side.
► Adjust the stop screw until the desired position is reached.
►
Make sure that the stop screw comes into contact with the respective stop surface.
►
Retighten the lock nut.
►
Repeat the process for the other side.
bt
3
bu
3
3 Stop screw
bt Drive flange 90°
bu Drive flange 180°
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com
INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ
DDOC00246 / d
EN / 2022-11-09