Zimmer SB Series, Инструкция по установке и эксплуатации

Страница: 15 / 23

15
11 Commissioning
11.1 Setting the swivel angle for the SB series
The swivel angle is preset to 180° at the factory. You can set the swivel angle to 90° by replacing the factory-installed end
stop. The product is equipped with stop screws that can be used to adjust the swivel angle by +/-3°.
►
Switch off the power supply.
►
Replace the mounted end stop.
►
Loosen the lock nut of the stop screw on the desired side.
► Adjust the stop screw until the desired position is reached.
►
Make sure that the stop screw comes into contact with the respective stop surface.
►
Retighten the lock nut.
►
Repeat the process for the other side.
3
br
3
bs
3 Stop screw
br
End stop 90°
bs End stop 180°
INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ
DDOC00246 / d
EN / 2022-11-09
Zimmer GmbH • Im Salmenkopf 5 •

77866 Rheinau, Germany •

+49 7844 9138 0 • www.zimmer-group.com