Zhone zNID-GE-2402, Руководство по настройке

Страница: 212 / 226

Configuration
212
zNID 24xx Series Configuration Guide
Packets which require the highest throughput or are sensitive to latency (the
amount of time between received packets) should be in higher priority queues.
Normally video and voice are more sensitive to throughput and latency issues.
Precedence
IP packets have a ToS byte in their headers that contains information about
relative priority. The IP Precedence field contains a 3-bit priority designation.
Most normal traffic has an IP Precedence value of zero. Higher values in this
field indicate that traffic is more important and that it requires special treatment.
IP Precedence values greater than 5 are reserved for network functions.
The format of the ToS byte:
Note:
Data is prioritized using only the Precedence bits, not the
entire Diffserv field.
5 High WRR 16/8/4 (weight = 16)
6 Critical Strict priority
7 Critical Strict priority
Table 59: Precedence values
Precedence Values Priority Queue Priority Method
0 (Routine) Low WRR 16/8/4 (weight = 4)
32 (Priority) Low WRR 16/8/4 (weight = 4)
64 (Immediate) Med WRR 16/8/4 (weight = 8)
96 (Flash) Med WRR 16/8/4 (weight = 8)
128 (Flash Override) Med WRR 16/8/4 (weight = 16)
160 (Critical) High WRR 16/8/4 (weight = 16)
192 (Internetwork Control) Critical Strict priority
224 (Network Control) Critical Strict priority
Table 58: CoS value to priority mapping
CoS Value Priority Queue Priority Method