Zhone zNID-GE-2402, Руководство по настройке

Страница: 29 / 226

Logging in to the 24xx series zNIDs
zNID 24xx Series Configuration Guide
29
Logging in to the 24xx series zNIDs
There are a few ways to log directly into the 24xx series zNIDs, both out of
band and in band.
•
Logging in on the Ethernet ports
•
Logging in with CLI
Logging in on the Ethernet ports
The zNID 24xx can be managed from the Ethernet ports.
•
The ONU has a default IP address of 192.168.1.1 on the Ethernet port.
The user can connect a standard PC to the Ethernet port (eth1) and
configure the ONU using a standard web browser or telnet session. The
PC will need to have an IP address on the same subnet. Typically,
192.168.1.100 is used. Of course, if you change the IP address of the
ONU, you will lose connectivity. You would then need to reconfigure
your PC to be on the same subnet.
•
The default login is “admin” and the default password is “zhone”
Note: For security reasons the password should be changed from the
default password. To change the password see User names and
passwords on page 31 .
Logging in with CLI
The complete list of CLI commands can be found in the CLI guide located at:
www.zhone.com/support/manuals.
Login: admin
Password: zhone
ZNID24xx-Router>
To log out of the system, enter the logout command:
ZNID24xx-Router> logout
Note: For security reasons the password should be changed from the
default password. To change the password in the CLI, see the zNID
Command Line Interface Reference Guide at zhone.com.