manualshive.com logo in svg

Zhone zNID-GE-2402, Руководство по настройке

Поделиться
Скачать
Zhone zNID-GE-2402 Скачать руководство пользователя страница 61

Device info

 zNID 24xx Series Configuration Guide

61

 

Statistics

The device maintains counters for the number of bytes and frames that are 
transmitted as well as received for every Ethernet interface on the ONU, 
including the Fiber WAN uplink interface (Either GPON or GigE) and the 
Wireless LAN interface. 

Figure 37:  LAN side statistics

The LAN side interfaces uses Ethernet statistics and shows the number of 
received and transmitted bytes, frames, errors and drops.

Resetting the statistics by clicking 

Reset Statistics

 is a good means of 

determining if frames are being sent or received, or if errors or drops are still 
occurring.

Table 11:  LAN side statistics

UI Label

Description

Received Bytes

The number of ingress bytes into the interface, since 
statistics were last reset. This is the data coming into 
the ONU from an external source. 

Received Frms

The number of ingress frames into the interface, since 
statistics were last reset. This is the data coming into 
the ONU from an external source. 

Received Errs

The number of ingress frames that were received in 
error on the interface, since statistics were last reset. 

Received Drops

The number of ingress frames that were received in 
error on the interface, since statistics were last reset due 
to addressing errors or memory limitations. 

Transmitted Bytes

The number of egress bytes transmitted out the 
interface, since statistics were last reset. This is the data 
going to an external device. 

Содержание zNID-GE-2402



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды