manualshive.com logo in svg

Zhone zNID-GE-2402, Руководство по настройке

Поделиться
Скачать
Zhone zNID-GE-2402 Скачать руководство пользователя страница 24

Management

24

zNID 24xx Series Configuration Guide

 

OMCI configured ONU flows

OMCI configured ONU flows have a one to one mapping between the WAN 
side GEM port (GPON Encryption Method port) and the LAN side UNI (User 
Network Interface). Other than exception packets which require analysis, such 
as IGMP joins and leaves or ARPs, the traffic is generally a cut-through 
between the GEM and the UNI.

OMCI configured ONU flows are handled entirely by Classification, 
Modification, and Forwarding (CMF) hardware functions. The GPON 
interface and each Ethernet LAN port of the 24xx have dedicated CMFs.   
Downstream packets that arrive on each GEM are classified based on the 
classification rules that have been created by OMCI provisioning actions. 
Packets that match a Classification Rule are Modified as specified by that rule 
and Forwarded to the egress port specified by that rule. Packets that are not 
classified are dropped/blocked.   Exception packets that require CPU analysis 
(like the IGMP joins and leaves or ARPs) are classified on ingress and 
forwarded to the CPU for action. This ONU forwarding architecture is 
illustrated in the diagram below.

Figure 4:  OMCI configured flows

You cannot map two UNIs to the same GEM when configuring ONU flows. If 
three Ethernet Ports must be configured as members of the same VLAN for 
High Speed Internet Access Service, three GEMs are required. The same 

Содержание zNID-GE-2402



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды