24 Installation and Operating Instructions V01
3.
Press the clamping bracket down until it audibly snaps into place.
4.
Ensure that the cable is correctly positioned:
Result
Measure
If the stranded wires are visible in the
chamber of the clamping bracket, the cable is
correctly positioned.
•Proceed to step 5.
If the stranded wires are not visible in the
chamber, the cable is not correctly positioned.
•Release the clamping bracket. To do so, insert
a flat-blade screwdriver (blade width: 3.5
mm) into the clamping bracket and lever it
open.
•Remove the cable and go back to step 2.
5.
Push the swivel nut up to the thread and tighten (torque: 2 Nm).
