18 Installation and Operating Instructions V01
4.
Insert the bared conductors into the suitable cord end terminals and crimp them
by using a crimper.
5.
Insert the crimped conductors L1, L2, L3, N and PE into the corresponding
terminals and tighten the screw with torque 2.0Nm using an Allen key (AF 2.5).
6.
Assemble the socket element, adapter and swivel nut together. Match the plastic
fixture with the socket element and grip them, then screw the adapter and swivel
nut as shown below with a torque of 4Nm.
7.
Insert the AC connect plug into the receptacle on the inverter, then screw the
socket element clockwise until it snaps into place.
Damage to the inverter due to wrong wiring
•
Please ensure that the type of the conductors matches the signs of the terminals on the
socket element.
