SECTION ЗВ - DATA ENTRY DEVICES
PROGRAMMING CHECKLIST FOR MODEL 16 (TO ALLOW ENTRY STATION PAGING)
This list summarizes the Model 16 parameters that should be programmed so
that it will interface correctly with Data Entry Stations. Each setting
listed is the one that will permit a typical Data Entry Station to
communicate with the Model 16; other settings may be used to fill specific
needs.
PARAMETER
MENU HEADING
WHERE FOUND
SETTING
COMMENTS
Serial port
baud rate
Communications
(as req'd)
This applies to custom
applications to an
external computer. This
rate must match that of
the computer. Dial up
Entry Stations always use
the modem at 300 baud.
Local timeouts Communications
Disable
Disable the inactivity
timeout when using an
Entry Station that
connects to the Local
phone jack or the
computer serial port.
This assures that the
Entry Station will not
have to reconnect and
logon to the Model 16
before each page.
Transaction
msgs
Paging Options
Enabled
When Enabled, the Model
16 responds with the
<optional> messages as
described in Section 5.
Security code
Passwords
(as req'd)
The Security code or
password programmed into
each Entry Station must
match the one programmed
into the Model 16.
3B-4
