SECTION 4B - USER PROGRAMMING
Display (D)
This selection will help you to see what has been programmed. Because
the number of Users is large, you can view a selected range of them by
specifying the first User that you want to see (press CR by itself to
see them all), then by pressing the space bar to alternately stop and
restart the scroll. Hit a CR to terminate the display. If pressing the
space bar will not stop the scroll (this may be the case if the
terminal or CRT cannot keep up with the Model 16) then use CNTL-S to
stop and CNTL-Q to resume.
The column header is repeated every 20 listings so that it will always
appear on a standard sized 25 line display. If listings are shown for
Users outside the call capacity of your Model 16, they should be
ignored.
The column header is shown as
User Va Pr To Rm Tk A1 Fm Fu Capcode
and the abbreviations stand for:
User
Va
Pr
To
Rm
A1
Fm
Fu
Capcode
Validate (V)
User number of attributes listed
Validation, Y=Yes, N=No
Priority page, Y=Yes, N=No
Tone Only restriction, Y=Yes, N=No
Requires message, Y=Yes, N=No
Alphanumeric messages, Y=Yes, N=No (numeric)
paging Format block (see "System - Paging Formats" for
the actual Format type that is programmed)
Function digit
the pager capcode
Each User can be individually permitted or denied paging access.
Invalidation can be used to disable unassigned User numbers or to
terminate service to non-paying Users.
Answer Yes to Validate and No to Invalidate.
4B-3
