Zetor COMPAX CL Series Скачать руководство пользователя страница 86 | Manualshive

Страница: 86 / 114

Zetor COMPAX CL Series Скачать руководство пользователя страница 86

Hoses and Connections Check

Fuel lines, radiator hoses, hydraulic and rubber hoses are consumables that degrade with age and use.
Check them regularly and replace defective ones.
1. Carry out the check with the engine sufficiently cooled down.
2. Check fuel lines, coolant hoses, and other rubber hoses for damage or leaks. Replace, if necessary
3. Check the tightening of the clamps.

ATTENTION:

Damaged fuel lines leak and may cause fire.

Damaged radiator hoses can cause hot water burns and, in severe cases, damage the engine.

Tire Pressure

Tire pressure has a direct impact on tire life and its off-road characteristics.
Check the tire pressure visually before using the tractor, see the enclosed picture.

IMPORTANT:

We recommend to check the tire pressure with a pressure gauge and not rely

solely on a visual tire pressure check.

Permissible wheel combination for tractors

1. Over-inflated Tire
2. Correct Inflation
3. Under-inflated Tire

HODP104

Tire

Standard

Specifications

Front (R1 / Agricultural)

8-16 4PR

Rear (R1 / Agricultural)

12.4-24 6PR

Front (R4 / Industrial tires)

27X10.5-15 8PR

Rear (R4 / Industrial tires)

12.5X20 10PR

Front (R3 / Turf tires)

27X10.50-15 4PR

Rear (R3 / Turf tires)

41x14.00-20 4PR

MAINTENANCE

85

«
...
84
85
86
87
88
...
»

Содержание COMPAX CL Series



















































































































Отзывы:

Нет отзывов