Zetor COMPAX CL Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 114

Zetor COMPAX CL Series Скачать руководство пользователя страница 21

Practice safe maintenance

Avoid high-pressure fluids

Prevent battery explosions

Be thoroughly familiar with the service procedure before
performing work.
Keep the tractor area clean and dry.
Do not attempt to service the tractor while it is in motion.
Be careful not to let your body or clothing get into the
rotating shaft.
Always lower all attached equipment on the ground. Turn
off the engine.
Remove the ignition key. Let the tractor cool down before
any repairs.
All parts of the tractor that need to be lifted for service
work must be securely supported.
Keep all parts in good conditions and properly installed.
Replace worn or damaged parts. Replace
damaged/missing plates.
Remove any accumulated excess grease or oil from the
tractor.
Disconnect the battery ground cable (-) before making
adjustments to electrical systems or performing welding
work on the tractor.

U18N143

Liquid escaping under pressure can penetrate the skin
and cause serious injury. Be especially careful when
handling the injection elements - there is a risk of injecting
liquids under high pressure under the skin of your hands
or other parts of your body. If ANY liquid penetrates the
skin, contact your doctor immediately.

U18N144

Keep sparks, lighted matches, and open flame away from
the top of battery. Battery gas can explode. Never check
battery charge by placing a metal object across the poles.

U18N145

SAFETY INSTRUCTIONS, DO'S & DON'TS

20

«
...
19
20
21
22
23
...
»

Содержание COMPAX CL Series



















































































































Отзывы:

Нет отзывов