Zetor COMPAX CL Series, Руководство оператора, Страница: 81 / 114

Electric System Check
Battery Check and Charging
Low temperatures affect battery performance, so pay special attention to them in winter.
Remove the battery and store it in a cool, dry place before prolonged shutdown.
If the battery remains in the tractor, disconnect the negative terminal.
If the batteries are not used for a long period of time, they will self-discharge.
If the battery contacts are oxidized, clean them with sandpaper or a steel brush.
Battery Specifications
12V 80AH
Battery Charging
Charge the battery only in a well-ventilated area.
The battery produces highly flammable hydrogen gases that can explode. Keep flammable objects
and sparks away from the battery.
The electrolyte contains acid which can cause severe burns.
If the electrolyte battery gets in your eyes or on your skin, rinse them thoroughly with water.
If swallowed, drink plenty of water and seek medical advice immediately.
Start with the Other Vehicle
1. Turn the ignition switch to the 'OFF' position and
remove the battery from the tractor.
2. Recharge the battery in a well-ventilated area.
3. Avoid charging the battery with a large charging current.
4. Properly connect the charger cables to the negative and
positive terminals of the battery.
5. When using the charger, its charging current must be
below 10 A.
UCL18N076
1. Switch off all electrical appliances.
2. Use a connecting cable to connect the positive
terminals of battery of vehicles.
3. Use a connecting cable to connect the negative
terminal of a standard battery to the tractor engine case
with the discharged battery.
4. First start the engine of the vehicle with the charged
battery. Then start the tractor engine with the discharged
battery.
5. When the engine is started, disconnect the negative
cable first. Then disconnect the positive cable.
6. After starting the engine, charge the discharged battery
for about 30 minutes.
HODP136
MAINTENANCE
80