Zetor COMPAX CL Series, Руководство оператора, Страница: 56 / 114

PTO Shift Lever
Only move the PTO shift lever with the PTO switched off.
Always use the clutch when connecting or disconnecting the PTO shaft.
PTO Shaft Cover
Do not connect the PTO shaft while the engine is running and make sure all protective covers
are in place.
Under no circumstances should the rotational speeds specified by the implement
manufacturer be exceeded, as this may result in serious damage to the tractor/equipment and
serious injuries to bystanders.
Read the operating and maintenance manual of the implement carefully before operating it.
The measures must be taken to ensure that there are not bystanders around the tractor while
working with a PTO-driven implement. Rotating blades of the implement can cause serious injuries.
When not in use, install a protective cap on the PTO shaft.
To engage PTO, pull the shift lever to the 'ON' position.
To disengage PTO, pull the shift lever to the 'OFF'
position.
CCL3540024
Rear PTO
PTO speed (rpm) 540
When not in use, lubricate the PTO shaft with grease and
install a cap.
CCL3540025
TRACTOR CONTROLS
55