Zetor COMPAX CL Series, Руководство оператора, Страница: 76 / 114

Engine Oil and Filter Replacement
Always use the oil types and classes according to relevant specifications and observe the oil change
intervals. (see Tractor Maintenance chapter).
Engine Oil Check
Engine Oil Change
Park tractor on level surface, shutoff engine. Remove sump plug & drain oil.
Replace and check the sump plug and refill the engine with oil to the correct level on the dipstick. (Approx.
2.11 gal)
When changing the oil, always replace the filter as well.
Always use the prescribed oil, as using different types of oils or oils with different specifications can
cause damage.
At the end of its service life, dispose of the oil in accordance with applicable regulations.
Remove the dipstick, wipe it and immerse in the oil pan.
Make sure the oil level is between the upper and lower
mark, near the upper mark. If the oil level is not as
specified, top up with the specified oil.
1. Minimum Level
2. Maximum Level
HODP096
Do not overfill the crankcase with oil.
Engine Oil Specifications
Oil for diesel engines
API class CD, SAE 10W/30, 10W/40
Engine Oil Filter Replacement
Using the oil filter wrench to loosen the filter, turn the
filter anticlockwise to remove it. Lightly grease the new oil
filter sealing to fix it in the correct position and perfect
tightness. Turn clockwise until the sealing reaches the
base, then rotate another 2/3 turn to tighten it properly.
1. Engine Oil Filter
CCL3540042
MAINTENANCE
75