Zetor COMPAX CL Series, Руководство оператора, Страница: 78 / 114

Front Axle Oil Check and Change
Check
Change
Always use the prescribed oil, as using different types of oils or oils with different
specifications can cause damage.
Only add the prescribed amount of oil.
At the end of its service life, dispose of the oil in accordance with applicable regulations.
Specifications
Transmission oil SAE 80W/90
(API GL-4 or higher)
Remove the dipstick, wipe its end and insert it back. Then
pull it out and check that the oil level is between the upper
and lower mark.
In case of lack of oil, top up with the prescribed oil.
1 - Maximum
2 - Minimum
CCL3540046
To drain the oil from the front axle, unscrew the drain
plugs on the bottom side of the axle and on the left/right
reducer.
After draining the oil, screw the drain plugs back and
tighten them, check for leaks.
Remove the front axle filler cap and fill with new oil that
does not exceed the maximum level indicated by the
mark.
U18N079
MAINTENANCE
77