Zeta Alarm Systems.
Classic 2000 Mk II Operation Manual
Revision 1.0
Part # MAN-Z3K-01
Page 13
1.5.2 Point Programming Overview
The Classic 2000 Mk II allows for programming of all system inputs and outputs. For specific pro-
gramming instructions, refer to Section 4.
NOTE: Every time you make a change in programming to add or delete SLC or Network devices,
you must rescan the loops (Auto-Program Mode).
1.5.2.1 SLC Devices, Bases, and Accessories
There are sixteen types of SLC devices available for the Classic 2000 Mk II system. These
devices include sensors and three varieties of bases, mini and standard priority switch monitor
modules, a sounder control module, a combination input/output module, and a short circuit isolator
module as shown below.
1.5.2.2 Global Input Programming Options
Auto-Test Time
Define Photo Sensor Analog Sensitivity settings for Low, Medium and High
Define Ion Sensor Analog Sensitivity settings for Low, Medium and High
Define Temperature Sensor set points for High, Medium and Low temperatures
Establish Maintenance & Service Alerts for photo, ion and temperature sensors
Part Number
Description
55000-550
Ion Sensor Head
55000-650
Photo Sensor Head
55000-450
Temperature Sensor Head
55000-750
Isolator Module
45681-211
Isolator Base
45681-234
Low-Profile Base, 6”
MB-RLY-XP95A
Base with Relay, 4-wire
MB-SDR-XP95A
Base with Sounder, 4-wire
45681-771
Xpert Address Programming Card
55000-830
Mini Priority Monitor Module
55000-806
Priority Monitor Module
55000-825
Sounder Control Module
55000-820
Monitor Input/Output Module
RW-AA-N
Duct Housing w/ Ionization Sensor Head, Exhaust Tube
RW-AA-P
Duct Housing w/ Photoelectric Sensor Head, Exhaust Tube
RW-AR-N
Duct Housing w/ Ionization Head, Exhaust Tube, Form C Relay
RW-AR-P
Duct Housing w/ Photoelectric Head, Exhaust Tube, Form C Relay
