Zepro Z 45-90, Руководство по установке

Страница: 62 / 68

Z 45/75-90/110
62
Testing and verification
www.zepro.com
10 Testing and verification
Testing and verification of the tail lift takes place in accordance with the installation/delivery inspection. Verify
that the tail lift is suitable for the vehicle in question and for the intended use.
10.1 Static load test
10.1.1 Deformation
Position the tail lift half way up to the vehicle floor level and with the platform in the horizontal position. Meas -
ure dimensions A-B-C-D for comparison as illustrated.
Place a test load on the platform according to the table (for the respective tail lift model/lifting capacity).
Remove the test load from the platform.
Repeat the measurement of A-B-C-D and verify that there has been no deformation of the lift or its fixing.
10.1.2 Drift
Place a test load on the platform according to the table. The tail lift must be at the same level and angle as
the vehicle floor. Leave the test load for 15 minutes.
Verify that the platform drift is no more than 15 mm on the vertical (points A and D) and 2º in terms of the
angular direction (points B and C) in relation to the vehicle floor level.
10.1.3 Static load (Test load 1.25 x respective lift load capacity). For lifts with
load centre distance of 600 mm.
Capacity Load 500 kg Load 1000 kg
Distance on platform (L)
450 kg (450 kg) 675 mm -
500 kg 750 mm -
700 kg 1050 mm -
750 kg 1125 mm -
1000 kg 1450 mm 750 mm
1500 kg 2250 mm 1125 mm
2000 kg - 1550 mm
2500 kg - 1875 mm
10.1.4 Static load (Test load 1.25 x respective lift load capacity). For lifts with
load centre distance of 750 mm.
Capacity Load 1000 kg Load 1500 kg
Distance on platform (L)
1000 kg 940 mm -
1500 kg 1410 mm 940 mm
2000 kg 1875 mm 1250 mm
2500 kg 2340 mm 1560 mm