Zepro Z 45-90 Скачать руководство пользователя

Страница: 6 / 68

Z 45/75-90/110

Important information

www.zepro.com

1.3

Identification

1.4

CE marking

ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer

guarantees that the product complies with the EU Machinery Directive.

Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are not

permitted. Welding is not permitted.

1.5

Product approval

Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.

1.6

Hydraulic oil

If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.

Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined

mineral oil (art. no. 21963, 1 litre).

Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted to

be filled with the oil specified on the label.

1.7

Guarantee

After installation, testing and verification, the tail lift’s delivery card must be registered for the guarantee to be valid.

E.g. Z 75 - 110 SA

_ _ _ _ _ _ - _ _ _ _ _

Identification list

Z = Standard model

ZL = Wide frame, wide lift arm

ZN = Wide frame, narrow lift arm

ZU = Standard model, 3 - part u protection

ZLU = Wide frame, wide lift arm, 3 - part u protection

ZNU = Wide frame, narrow lift arm, 3 - part u protection
Max. lifting capacity x 10 (kg)
Max. lifting height x 10 (mm)
Cylinder model, S = Single acting Single speed Tilt

Single acting Single speed Lift

SA = Single acting Single speed Adjustable Tilt

Single acting Single speed Lift

Содержание Z 45-90





































































Результаты поиска

Содержание Z 45-90

Отзывы:

Похожие инструкции для Z 45-90

Бренды по названию

Популярные бренды

Zepro Z 45-90, Руководство по установке

Результаты поиска

Содержание Z 45-90

Отзывы:

Похожие инструкции для Z 45-90

Бренды по названию

Популярные бренды