Z 45/75-90/110
Installation
33
www.zepro.com
4.12
Sealing strip, integrated rubber strip
1.
Check that the distance between the vehicle floor and the platform is 38 - 40 mm, see
Image 40.
2.
Measure out and cut the impact profile and rubber strip to the desired length.
3. Mark where to drill holes for the self-tapping screw.
4. Drill holes (Ø 7.2 mm) for the screws.
5.
Mount screws and nut on the arm stop and mount them on the stop profile, see
Image 42 and Image 43.
6.
Place the arm stop according to the position of the lift arms and fix by tightening its screws, see
Image 47.
7.
Screw the stop profile into the pre-drilled holes, see
Image 44
8.
Insert and mount the rubber strip in the stop profile, see
Image 45.
9. Lock the rubber strip and the associated screw, see Image 46.
Rubber strip
Stop profile
Arm stops
Image 42. Install screw,
nut arm stop
Image 43. Install-
ing the arm stops
Image 44. Screw on
the stop profile
Image 45. Mount
the rubber strip
Image 46. Lock the rubber strip
Image 47. Fix the arm stop
Содержание Z 45-90
Страница 2: ......
