Zepro Z 45-90, Руководство по установке

Страница: 37 / 68

Z 45/75-90/110 Installation
37 www.zepro.com
4.15.1 Controller CD 1
1. Fit the controllers in the desired locations.
However, locate them such that the operator’s
working position is as safe as possible, and with
an adequate overview of the load, tail lift and their
working area.
2. The distance between the vehicle’s rear edge and
the centre of the controllers must be 300-600 mm.
The distance between the controllers must be at
least 260 mm. See Image 54.
3. Any additional controllers can be installed in an
optional location.
4. Run the controller cabling to the tail lift cable grom-
met. Connection is described later in section 6.
Image 54. Installing control-
ler CD 1 with two-handed grip.
Min. 260 mm.
300 - 600 mm.