ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
8
8
2. CONFIGURATION
2.1. GENERAL CONCEPTS
The IRSC-Zone application program permits controlling air conditioning systems from
different manufacturers in an equivalent manner as when they are controlled through the infrared
remote control of the machine.
Zennio´s homepage (
http://www.zennio.com
) contains a correspondence table where a certain
number (from 0 to 255) is provided depending on the model of the A/C machine to be controlled.
This number is the first parameter to be set in ETS.
The IRSC-Zone application also permits selecting the
number of the zones
of the KNX installation
that will be controlled by the same central A/C machine, which can be 1
– 8.
Moreover, the following functionalities of the A/C machine can be configured:
ON/OFF
switch of each enabled zone.
Setpoint temperature
to acclimatize each enabled zone.
Working modes:
the desired working mode (Automatic, Heat, Cool, Fan, Dry) can be
chosen through independent binary objects (one per mode) or through a sole object (only one
object for mode selection). Moreover, apart from these conventional controls, it is possible to
enable a simplified control, which only permits commuting from Heat to Cold and vice versa.
Fan speed:
step control or precise control.
Thermostat:
it is possible to enable and configure this functionality for Heat mode, Cool
mode or both.
For further details and examples please refer to the Annexes of this manual.
