ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
19
19
Cycle time: value, in minutes, for the sending period of the PWM control variable
during the grille control process.
Proportional band: parameter required for calculating the proportional integral
function, expressed in Kelvin.
Integral time: parameter required for calculating the proportional integral function,
expressed in minutes.
Annex II of this manual includes a brief introduction to these two thermostatic control methods, and
to what they involve in relation to grille control. In addition, to obtain more detailed information about
all these parameters related to the thermostatic control, please consult the specific document
"
Clima I - Zennio Thermostat Home
", available at
http://www.zennio.com
.
2.8. RESET
From this window, it is possible to configure whether to send or not to the KNX bus and/or to
the A/C unit the statuses of the different options that have been enabled by parameter, after
recovering from a bus power failure and/or after a device reset or a download from ETS.
Figure 3.7. Reset window
Sending statuses to BUS on bus voltage recovery:
it allows choosing whether to send
the status objects of the A/C unit to the KNX bus or not after a bus power failure, a device
reset from ETS or a download.
