ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
18
18
To better understand all these concepts, an application example has been included in Annex III of
this manual.
2.7. THERMOSTAT
From the Thermostat window it is possible to enable and configure the thermostat
functionality for cooling, heating or both.
In the case of not enabling a certain thermostatic control (the one for cooling, the one for heating or
both), the status of the grilles will be determined by the status of their zone (zone ON
grille open;
zone OFF
grille closed).
Figure 3.6. Thermostat window
Both for Cool thermostat and for Heat thermostat, the configurable parameters are the following:
Control type:
permits selecting one of these options: 2-point control or PI control (PWM).
2-point Control
Lower/Upper Hysteresis: the desired value, in tenths of a degree, for the lower
and upper hysteresis, respectively.
PI control (PWM)
