ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
3
3
DOCUMENT UPDATES
Version
Modifications
Page(s)
1.6a
Changes since version 1.5 of the application program:
Possibility to send read requests to the bus –after a download or a
device reset from ETS– of certain objects in order to recover the state
of the device.
-
Additional information about the basics of the device.
6-7
Extended information about the Mode parameter.
8
Detailed information about zone-associated objects.
9-10
Parameter "Zone Update on Start-up"
12
Explanation about the available modes.
13
Extended explanation about mode changes.
14
Note referring to Annex II.
14
Extended explanation about the “Force...” parameters
15
Additional explanations/notes about how temperature restrictions apply
16-17
Information referred to parameter "Temperature returned from external
sensor"
17
Additional explanation about the behaviour of the grille when thermostatic
control has not been enabled.
18
Reference to Annex II.
19
Parameter "Zone Update on Start-up" and notes about sendings on power
recovery and device reset events.
20-21
New Annex II
23-24
Application example extended and moved to a new section (Annex III)
25-26
General improvement of this English version of the manual – texts and minor
issues.
-
